FPGA Engineer
FPGA Engineer, Linthicum Heights, MDWe are looking for multiple FPGA Engineer candidates at multiple levels for this position.
Candidates must be US Citizens and cannot have Dual Citizenships.
All candidates must be fully vaccinated with an FDA authorized and/or approved COVID-19 vaccine as a condition of employment.
Requests for reasonable accommodations for medical, religious, or other reasons will be considered in accordance with applicable law.
These positions are 100% Onsite.
Responsibilities:
- Participate in all phases of FPGA design flow, from concept to mass production.
- Develop high-level design requirements and block-level micro-architectures, partition design within ASIC/FPGA, create specification documents.
- Develop RTL designs using SystemVerilog, with emphasis on DSP and digital communication system blocks (frontend, physical layer, link layer, error correction, etc.
).
- Optimize designs for area, speed, and power to meet system requirements; analyze architectural trade-offs.
- Develop test benches and test cases for block-level functional verification, emphasizing bit-matching and self-checking.
- Verify DSP blocks against fixed-point MATLAB model, work in collaboration with systems engineers.
- Participate in SoC and FPGA integration activities.
- Prototype designs on FPGA, focusing on closely emulating the final product functionality.
- Perform lint checking, CDC checking, logic equivalence checking, and other EDA tool-based checks.
- Work with backend/implementation teams to address synthesis, timing, layout, and DFT issues for ASICs.
- Bring-up and validate ASICs and FPGAs in the lab, utilize various lab equipment.
- Collaborate with software engineers in developing production software for your designs.
Qualifications:
- 5
years of experience FPGA design.
- 2
years of experience in working with ASICs and/or FPGAs (internship and research experience qualifies).
- 2
years of experience in SystemVerilog, Verilog, or VHDL RTL design.
- 2
years of experience in scripting and programming languages in two or more of the following:
MATLAB, Python, C/C++, Tcl, Makefiles, Bash.
- Development experience in HDL (Verilog or VHDL).
- Experience developing software using a formal Software Development Lifecycle process (SDLC).
- Firmware architecture and design experience.
Minimum
Qualifications:
- 2
years of experience in designing DSP or digital communication system datapath blocks (eg, filters, transforms, PHY blocks, loops, FEC, etc.
).
- Experience in Xilinx advanced FPGAs, eval boards, and knowledge of FPGA design flow.
- Knowledge of different digital modulation techniques (eg, PSK, QAM, OFDMA, etc.
).
- Knowledge of wireless communications systems and standards (eg, LTE, Wi-Fi, Bluetooth, etc.
).
- Knowledge of industry standard interfaces, protocols, and architectures, PCIe, Ethernet, AMBA, DDR, etc.
- Experience in developing automated, self-checking test benches.
- Knowledge or understanding of UVM verification framework.
- Experience in EDA tools such as simulators (eg, Questa), lint checkers (eg, Spyglass), synthesis (eg, Synopsys Synplify), FPGA tools (eg, Vivado).
- Experience in synthesis and static timing analysis, knowledge of timing closure techniques for high-speed designs.
- Experience in ASIC/FPGA/SoC system-level/top-level integration.
- Familiarity with design for testability (DFT) and high reliability ASIC design and implementations.
Keywords:
Linthicum Heights MD Jobs, FPGA Engineer, FPGA, DSP, Xilinx, PSK, QAM, OFDMA, PCIe, Ethernet, AMBA, DDR, UVM, Questa, Spyglass, Synopsys, Synplify, Vivado, ASIC, Electrical Engineer, Maryland Recruiters, Information Technology Jobs, IT Jobs, Maryland RecruitingLooking to hire for similar positions in Linthicum Heights, MD or in other cities? Our IT recruiting agencies and staffing companies can help.
We help companies that are looking to hire FPGA Engineers for jobs in Linthicum Heights, Maryland and in other cities too.
Please contact our IT recruiting agencies and IT staffing companies today! Phone 630- - ext.
11 or email us at Click Here to Email Your Resum .
.
Estimated Salary: $20 to $28 per hour based on qualifications.
Candidates must be US Citizens and cannot have Dual Citizenships.
All candidates must be fully vaccinated with an FDA authorized and/or approved COVID-19 vaccine as a condition of employment.
Requests for reasonable accommodations for medical, religious, or other reasons will be considered in accordance with applicable law.
These positions are 100% Onsite.
Responsibilities:
- Participate in all phases of FPGA design flow, from concept to mass production.
- Develop high-level design requirements and block-level micro-architectures, partition design within ASIC/FPGA, create specification documents.
- Develop RTL designs using SystemVerilog, with emphasis on DSP and digital communication system blocks (frontend, physical layer, link layer, error correction, etc.
).
- Optimize designs for area, speed, and power to meet system requirements; analyze architectural trade-offs.
- Develop test benches and test cases for block-level functional verification, emphasizing bit-matching and self-checking.
- Verify DSP blocks against fixed-point MATLAB model, work in collaboration with systems engineers.
- Participate in SoC and FPGA integration activities.
- Prototype designs on FPGA, focusing on closely emulating the final product functionality.
- Perform lint checking, CDC checking, logic equivalence checking, and other EDA tool-based checks.
- Work with backend/implementation teams to address synthesis, timing, layout, and DFT issues for ASICs.
- Bring-up and validate ASICs and FPGAs in the lab, utilize various lab equipment.
- Collaborate with software engineers in developing production software for your designs.
Qualifications:
- 5
years of experience FPGA design.
- 2
years of experience in working with ASICs and/or FPGAs (internship and research experience qualifies).
- 2
years of experience in SystemVerilog, Verilog, or VHDL RTL design.
- 2
years of experience in scripting and programming languages in two or more of the following:
MATLAB, Python, C/C++, Tcl, Makefiles, Bash.
- Development experience in HDL (Verilog or VHDL).
- Experience developing software using a formal Software Development Lifecycle process (SDLC).
- Firmware architecture and design experience.
Minimum
Qualifications:
- 2
years of experience in designing DSP or digital communication system datapath blocks (eg, filters, transforms, PHY blocks, loops, FEC, etc.
).
- Experience in Xilinx advanced FPGAs, eval boards, and knowledge of FPGA design flow.
- Knowledge of different digital modulation techniques (eg, PSK, QAM, OFDMA, etc.
).
- Knowledge of wireless communications systems and standards (eg, LTE, Wi-Fi, Bluetooth, etc.
).
- Knowledge of industry standard interfaces, protocols, and architectures, PCIe, Ethernet, AMBA, DDR, etc.
- Experience in developing automated, self-checking test benches.
- Knowledge or understanding of UVM verification framework.
- Experience in EDA tools such as simulators (eg, Questa), lint checkers (eg, Spyglass), synthesis (eg, Synopsys Synplify), FPGA tools (eg, Vivado).
- Experience in synthesis and static timing analysis, knowledge of timing closure techniques for high-speed designs.
- Experience in ASIC/FPGA/SoC system-level/top-level integration.
- Familiarity with design for testability (DFT) and high reliability ASIC design and implementations.
Keywords:
Linthicum Heights MD Jobs, FPGA Engineer, FPGA, DSP, Xilinx, PSK, QAM, OFDMA, PCIe, Ethernet, AMBA, DDR, UVM, Questa, Spyglass, Synopsys, Synplify, Vivado, ASIC, Electrical Engineer, Maryland Recruiters, Information Technology Jobs, IT Jobs, Maryland RecruitingLooking to hire for similar positions in Linthicum Heights, MD or in other cities? Our IT recruiting agencies and staffing companies can help.
We help companies that are looking to hire FPGA Engineers for jobs in Linthicum Heights, Maryland and in other cities too.
Please contact our IT recruiting agencies and IT staffing companies today! Phone 630- - ext.
11 or email us at Click Here to Email Your Resum .
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
